Skip to main content

adb no permissions error on linux mint 14 "nadia"

when this happen :

Create a file named /etc/udev/rules.d/99-android.rules with the following contents (hex vendor numbers were taken from the vendor list page):
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0e79", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="413c", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="091e", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="24e3", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2116", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0482", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="17ef", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0409", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2080", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0955", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2257", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="10a9", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1d4d", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0471", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04da", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1f53", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04dd", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0930", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="19d2", MODE="0666"

or you can add "idVendor" with lsusb command

Bus 001 Device 005: ID 12d1:1021 Huawei Technologies Co., Ltd. 
Bus 001 Device 004: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE


Run the following commands (without the leading $):
$ sudo vi /etc/udev/rules.d/99-android.rules
$ sudo chmod 644   /etc/udev/rules.d/51-android.rules
$ sudo chown root. /etc/udev/rules.d/51-android.rules
$ sudo service udev restart
$ sudo killall adb

Disconnect the USB cable between the phone and the computer.
Reconnect the phone.
Run adb devices to confirm that now it has permission to access the phone.


Please note that it's possible to use , USER="$LOGINNAME" instead of , MODE="0666" in the .rules file, substituting $LOGINNAME for your login name, i.e. what id -nu prints.

Comments

Popular posts from this blog

Webalizer - Statistik trafik/kunjungan web (ubuntu)

--goal--
make subdomain trafik statistik

--install--
run this command :
sudo apt-get install webalizeredit "/etc/apache2/apache2.conf" , set
HostnameLookups Off into :
HostnameLookups On
--1--
All we need is already prepared, now set log of vhost in "/etc/apache2/sites-enabled" to spesifict folder.
exp. $sudo vi /etc/apache2/sites-enabled/monitor CustomLog ${APACHE_LOG_DIR}/access.log into: CustomLog ${APACHE_LOG_DIR}/vhost/monitor/access.logrestart service
$sudo /etc/init.d/apache2 restart
--2--
create another file config of webalizer in /etc/webalizer
exp. vi /etc/webalier/monitor.conf
set the LogFile to apache2 logfile:
LogFile /var/log/apache2/vhost/monitor/access.log # apache log OutputDir /var/webalizer/monitor/ #webalizer report Incremental yes ReportTitle Usage statistics for HostName monitor.brekele.co.cc
--3--
create script to run webalizer via crontab
exp. vi /etc/webalizer/cron_job
#!/bin/bash echo "di jalankan pada: `date +"%d-%B-%Y %r"…

pgpoolAdmin, web interface for pgpool

--preparation--
next capter of pgpool from my last post ( here), now i wanna post about a tool that can manage pgpool from web interface called pgpoolAdmin. next... enjoy the post... ^_^

--1--
first we need to download pgpooladmin from here, extrak and copy or move to http directory( for exp : /var/www) 
$wget http://pgfoundry.org/frs/download.php/2964/pgpoolAdmin-3.0.3.tar.gz $tar zxvf pgpoolAdmin-3.0.3.tar.gz $sudo cp -Rf pgpoolAdmin-3.0.3 /var/www/test
 --2--
install pgpooladmin via web on: http://localhost/test/install


make sure owner of that file is "www-data"(of course have write akses) and check again



login with user that you create on /etc/pcp.conf (for more detail see my last post



and done.ya.. tooo.......!!!
 ^_^

send oracle 11g audit log to syslog server ( on other PC)

--preparation-- 
well...... this time i will write about syslog, and for this experiment what we need is :
- kiwi syslog server get from here and install it on your PC( i use xp for this server syslog)
- oracle db
- and of course, a cup of coffee is a must and other thing that make you relax and comfortable ( :p )

--scema--
first thing to do is redirect oracle audit log to syslog, and than from syslog send to syslog server( kiwi syslog)

--1--
 edit initSID.ora and add this folowing config :
create "/var/log/oracle/" firs
audit_file_dest='/var/log/oracle/' audit_trail='OS' AUDIT_SYSLOG_LEVEL=local1.warning after that edit /etc/syslog.conf, and add this folowing config :
#Save oracle rdbms audit trail to oracle_audit.log local1.warning /var/log/oracle/oracle_audit.log #Send oracle rdbms audit trail to remote syslog server local1.warning @1.1.1.1 #<= ip your syslog server--2--
restart syslog service with command :
/sbin/service syslog restart …